Ceracoat Ceramic | Shop

CERACOAT Ceramic Leather Care Car Inside 200ml

Carmen — Wed, 09 Feb 2022 17:03:46 +0000

CERACOAT LEATHER CARE CAR INSIDE

Ceracoat Ceramic Leather Care Car Inside coats and protects all your leather/plastic surfaces (but also painted wood) such as seats, car cockpits, steering wheels from liquids (water, oil, milk) and dirt in general and gives the leather or plastic a new deep shine. The surface has water-repellent properties (formation of drops), dust and dirt do no longer penetrate the pores. Ceracoat Ceramic Leather Care Car Inside is very long-lasting. After treatment with Ceracoat Ceramic Leather Care Car Inside, you no longer need conventional cleaners.

CERACOAT VI FA RISPARMIARE TEMPO E DENARO!

APPLICATION:

Leather/plastic surfaces must be clean and dry – shake well before use. You can coat leather/plastic, natural or already polished. Just give some drops of Ceracoat Ceramic Leather Care Car Inside onto a cloth and rub the surface and then let it act for a few hours.

CLEANING AFTER TREATMENT WITH CERACOAT

Dust, dirt and liquids can simply be shaken away or absorbed with an absorbent paper. Creamy and sticky liquids, such as grease or oil, can only be cleaned with water, rinsed away (or wiped away directly with a wet cloth). Then just absorb the water with an absorbent paper.

The post Shop first appeared on Ceracoat Ceramic.

CERACOAT DES long-lasting (6 months) hard surface coating (50m2) anti-bacteria + anti-virus 500ml

Carmen — Wed, 08 Apr 2020 16:20:59 +0000

CERACOAT®DES is a cleaner/disinfectant/coating/protector which leaves behind a Multi-Functional barrier on the surface with:

NATURAL AND ORGANIC COMPOUNDS
SAFE AND ECO-FRIENDLY FORMULATIONS
NON-TOXIC AND NON-ALLERGIC SOLUTIONS
SUSTAINABLE, RECYCLED AND RECYCLABLE FOOD SAFE INGREDIENTS
Hard Surface Sealant creates a microbiota barrier seal that helps to prevent cross infection by creating a hostile environment for pathogens and biofilm

In contrast to conventional disinfectants, antibacterial and antimicrobial protection occurs after a short
time and provides lasting protection against viruses, bacteria and microbes for up to 6 months.
No need of disinfectants any more for 6 months!

Viruses are the most common cause of infectious disease acquired in the indoor environment in hospitals, schools, work environments and households causing considerable impact on human health. COVID-19 has provided horrific insights into the mechanics of contagion and cross infection globally. Viruses are attached to droplets of moisture which move from the infected person via the air to high risk touch points. CERACOAT®DES HARD SURFACE SEALANT SPRAY Ideal for smooth non-absorbent high-risk touch points, including: doors, handles, elevator buttons, stair rails, loo seats, switches, touch screens, mobile phones, shopping trolleys, credit cards, desk surfaces, payment terminals, shopping areas, etc. Description Additional Information CERACOAT®DES: Bioflavonoids – a large group of non-toxic natural plant components – are widely recognized in healthcare for their potent natural antioxidant, anti‐inflammatory, anti-allergy, antibacterial, anti-fungal, antiviral, neuroprotective and healing activity, helping to fight even antibiotic-resistant bacteria. Our patented bioflavonoid complex offers natural, safe and powerful protection against prevalent respiratory infections such as SARS-COVID, Influenza and Rhinovirus. The formula has been proven by independent laboratories to destroy both enveloped and non-enveloped viruses within 1 to 5 minutes upon contact, depending on concentration and virus type, deactivating their ability to multiply and further infect healthy cells, while using organic, food-grade, GMO-free and generally non-allergenic plant-based ingredients. How to use: Apply CERACOAT®DES long-time disinfectant to the surface and spread evenly with a cloth. Let dry. Do not rinse.Can be used on all surfaces. Sustainable antimicrobial effect for up to 6 months (tested according to EN 13624:2013 – EN 1650:2019 – EN 1276:2019 – EN 13727:2012 + A2:2015) (enveloped viruses including coronavirus, HIV, HBV, HCV, herpes, influenza, Ebola virus …)

The post Shop first appeared on Ceracoat Ceramic.

CERACOAT Ceramic ProtectAll 200ml

Carmen — Thu, 27 Feb 2020 16:23:08 +0000

CERACOAT ProtectAll (for all hard surfaces)

Coating, Protector, Renovator for all HARD surfaces of glass, plastic, chrome, copper, silver, ceramic, metal: shower cabin, windows, mirrors, glass furniture, toilet, lavabo, bath, tiles, faucets, bathroom and kitchen in general. Ceracoat ProtectAll is also antibacterial and has anti-scratch & anti-finger-print properties.

CERACOAT ProtectAll is a very long-lasting surface renovator & protectant for non-absorbent / hard surfaces.

CERACOAT ProtectAll will renovate, make bright and shiny again all your hard surfaces and the thin nano Ceramic film will protect them. Surfaces become liquid & dirt repellent, and easy to clean. CERACOAT ProtectAll is foodstuff neutral, completely safe and anti-bacterial.

Toothpaste, soap, grease, calk, rain, dust will not adhere to the surfaces anymore and will not leave long-lasting dirt anymore. Easy to clean.

After treatment with CERACOAT ProtectAll you no longer need any cleaners. Just clean with a towel or rinse with water.

CERACOAT ProtectAll saves you time and money, by preserving the nature. CERACOAT ProtectAll is completely safe and foodstuff neutral!

APPPLICATION: Surface must be dry. Put some drops on a towel (or absorbent paper or micro fleece) and apply with circular movements. You will see a mat film. Wait 2-3 minutes and then, polish it clean until you no more see the mat film, but only a perfect shiny, smooth and clean surface. Please wait 2 h before exposing the CERACOATED surface to water. 10-20 ml per m2 / 10 sq ft is enough.

This will give you the best performance for a very long lasting protection.

CLEANING AFTER TREATMENT WITH CERACOAT ProtectAll

Dust, liquids and / or dirt are very easily removed using only a towel, an absorbent paper or just rinse it away with water and then dry it. No cleaners needed any more.

The post Shop first appeared on Ceracoat Ceramic.

CERACOAT Ceramic Shoe Care 200ml

Carmen — Wed, 04 Dec 2019 21:38:01 +0000

For all kind of shoes (suede leather, leather, textile) but also other absorbent surfaces of textiles, paper, cardboard, clothes, household textiles, furnitures, carpets, curtains,mattresses, bed textiles, car seats & carpets, car convertible hood.
Ceracoat Shoe Care waterproofs and protects your shoes (+ other absorbent surfaces) against rain/water (also oil, coffee, sauces, etc. for all absorbent surfaces) and dirt. Ceracoat Shoe protectant is foodstuff neutral. Ceracoat thin nano ceramic film will waterproof and protect your shoes (+ textile surfaces), whilst remaining totally invisible! Water is repelled (building drops, no penetration into the surface), dirt will not penetrate or adhere on the shoes anymore.
After treatment with Ceracoat you no longer need any cleaners or greases and will clean less. Ceracoat is breathable and permanent (UV-stable, very resistant to abrasion), and very long lasting.

CERACOAT VI FA RISPARMIARE TEMPO E DENARO!

APPLICATION: Surface must be clean and dry. Just spray Ceracoat shoe care on your shoes and let it dry. (Normally 24 h should be enough).
For textile: Start by testing them:
Put a drop of water on the surface. The drop has to be absorbed by the surface to be treated with Ceracoat. If the water drop is not absorbed immediately, this means that the surface is already treated and cannot be treated with Ceracoat.

The post Shop first appeared on Ceracoat Ceramic.

CERACOAT Ceramic Anti-Lime Quadro Bag

Carmen — Wed, 04 Dec 2019 21:36:55 +0000

GLASS/PLASTIC CARE (bathroom, kitchen)

For all surfaces of glass, plastic, chrome, copper, silver, ceramic, metal: shower cabin, toilet, lavabo, bath, tiles, bathroom in general, windows, mirrors, glass furniture. Ceracoat Anti-Lime is also antibacterial and has anti-scratch & anti-finger-print properties.

Ceracoat Anti-Lime is a very long-lasting protectant for non absorbent surfaces. (2 pre-cleaning wipes & 2 anti-lime coating wipes)

Ceracoat thin nano Ceramic film will protect all your glass, plastic, chrome, copper, silver, ceramic, metal surfaces. Surfaces become liquid & dirt repellent, easy to clean and LIME will not adhere any more! Ceracoat Anti-Lime is foodstuff neutral.

Toothpaste, soap, grease, will not adhere to the surfaces anymore.

No more lime on the surface. Easy to clean.

After treatment with Ceracoat you no longer need any cleaners. Just clean with a towel or rinse with water. Ceracoat saves you time and money!

APPLICAZIONE::

Surface must be dry
Use a lime cleaner to make sure surface is lime-free. Then clean with the pre-cleaning wipe and polish until surface is dry. Then use Ceracoat Anti-Lime NANO coating wipe with circular movements and polish it dry. Please wait 4 h before exposing the ceracoated surface to water. 1 wipe is enough for 4m2.

CLEANING AFTER TREATMENT WITH Ceracoat

Liquids and dirt are very easily removed just using a towel, an absorbent paper or just rinse it away with water. Surface will remain lime-free and no cleaners are needed any more.

The post Shop first appeared on Ceracoat Ceramic.

CERACOAT Ceramic Speed Engine Cleaner for Trucks 450ml

Carmen — Wed, 04 Dec 2019 21:32:36 +0000

For all types of engines (fuel, gasoline, diesel, turbo, truck (boat) race engines)

Pulisce l'intero interno del motore.

La sporcizia presente nel motore viene trasformata ed eliminata attraverso lo scarico.

Pulisce le valvole, il carburatore o l'accensione, i pistoni, la testa del cilindro, le pareti del cilindro, le fasce dei pistoni, l'intero sistema di scarico.

Binds existing water drops in the fuel tank and eliminates them. It stops adherence of new engine dirt, re-establishes the actual compression of the engine, and reduces the exhaust emissions massively.

Vantaggi principali

Pulisce e lubrifica l'intero sistema di alimentazione
Riduce il blow-by e lo sporcamento dell'olio motore
Minore sporcizia del sistema EGR
Tratta l'umidità nel carburante (biodiesel)
Riduce le emissioni di fuliggine e lo sporcamento del collettore di aspirazione
Riduce al minimo la fuliggine dei meccanismi dei sensori dei turbocompressori variabili
Ottimizza il consumo di carburante e garantisce una maggiore pulizia dei gas di scarico.
Migliora la combustione e le prestazioni del motore
Riduce la temperatura di rapprendimento del carburante (flocculazione in inverno)

CERACOAT FA RISPARMIARE TEMPO E DENARO!

APPLICATION:

(For all petrol and diesel engines: standard, turbo, race engines) Simply add Ceracoat Engine Cleaner in one time to the fuel (petrol or diesel) tank and then drive the vehicle for about 10 – 15 minutes. Best is to add one (1) dose every 20.000 km (12.000 mls). Please add one (1) dose when there are just about 60 liters (15 gallons) of fuel / gasoline left.

The post Shop first appeared on Ceracoat Ceramic.

CERACOAT Ceramic Wonder Cleaner 200 ml

Carmen — Wed, 04 Dec 2019 21:26:54 +0000

Aree di applicazione:
Pietra, sabbia, calcestruzzo, tegole, piastrelle, pietre naturali, granito, marmo, legno, teak, fibrocemento - mosaico - argilla, terracotta - mattoni - vetro, ceramica - superfici minerali - graniglia.

CERACOAT Wonder Cleaner è altamente efficace. È un concentrato universale che permette di pulire a fondo le superfici grazie all'innovativo procedimento di microscissione, che scompone la molecola dello sporco in particelle separate, rimuovendole in modo efficace senza tensioattivi, solventi, enzimi e candeggianti dannosi.

CERACOAT Wonder Cleaner elimina anche i resti persistenti di sporco come olio, grasso, fumo, nicotina, fuliggine, nonché i resti di tensioattivi e lo sporco di marmo, terrazzo, granito, piastrelle, gres fine.

Istruzioni per la miscelazione:
A secondo del grado d'inquinamento, il Wonder Cleaner può essere diluito con acqua distillata in un rapporto fino a 1 a 10.

Applicazione:
Spruzzare, lasciare agire brevemente e risciacquare con molto acqua.

IMPORTANTE!
Si prega di utilizzare guanti protettivi.
(Prima di iniziare i lavori di pulizia è necessario verificare l'idoneità di tutte le superfici alla pulizia)

The post Shop first appeared on Ceracoat Ceramic.

CERACOAT Ceramic Gun Care 200ml

Carmen — Wed, 04 Dec 2019 21:24:35 +0000

CERACOAT Gun Coating is not a traditional gun oil, it actually replaces any kind of oil on the gun. This product is a coating, based on liquid high-performance ceramics (no silicone & PTFE). Gun Coating is used as a care product with many advantages, but also as a technical tool such as in support of the sliding properties
and to prevent corrosion. Specifically to rifles, CERACOAT gun coating has the advantage that it is abrasion-resistant and cannot flow down as a result of gravity. CERACOAT gun coating is dry on the surface and can not be wiped off by hand. If the gun barrel covers by hand, the perspiration does not penetrate the coating and thus prevents corrosion.

CERACOAT Gun Coating on steel is a silky-matte finish and is colorless and odorless. Even older weapons have again a beautiful, intense look. CERACOAT gun coating can be applied on nearly all surfaces such as steel, wood (painted), rubber, plastic and cast iron. The direct application to gold and silver ornaments is also always possible. Active from -50°C to +750°C

Application: CERACOAT Gun Coating will be applied on the cleaned weapon. Metal parts should be degreased before application, so that the ceramic particles can adhere directly on the steel. Spray CERACOAT gun coating thin on the surface and distribute the product with a microfiber-towel so that a fine wet film comes into being. After that, CERACOAT gun coating dries from itself within 30min. After 2 hours it will be fully hardened. In case of using CERACOAT gun coating into the barrel, the barrel must be absolutely clean. Apply the CERACOAT gun coating with a cotton-plug and move the cleaning rod several times forward and backwards. For care-treatment of guns use the pump spray. For smaller parts and to reduce the trigger weight, you can apply some drops.

The post Shop first appeared on Ceracoat Ceramic.

CERACOAT Ceramic Anti Odor 200ml

Carmen — Wed, 04 Dec 2019 21:22:15 +0000

CERACOAT Anti Odor is very effective in order to eliminate unpleasant odors caused by organic substances. It can be used on all surfaces and for carpets and fabrics.

APPLICAZIONE:: Ideal for removing odors coming from garbage, cigarettes, pets, waste bags, sports bags, laundry baskets, etc.

CERACOAT Anti Odor for textiles is a chemical-free, pH neutral product for the removal of bad odors from organic impurities. This product is used when organic contaminants such as blood, urine, feces, sweat and body odor causes bad smells on textiles. The product also removes odors from dogs of carpets. CERACOAT Anti Odor is not harmful to humans and animals. It has a light fragrance, to ensure the fastest possible effect. This fragrance is reduced in a natural way again. Meanwhile, the microorganisms are dissolving those bacteria that cause the bad smell.

CARATTERISTICHE: High performance, highly concentrated – Researched without animal tests – pH-neutral, no toxic fumes – Safe for skin – Non-corrosive for surfaces – Safe for users, equipment and the environment – Gets no hypersensitivity syndrome – No ingredients of animal nutrient media – Compliance with the EC Directive 648/2004 on detergents – Fully biodegradable – Hypoallergenic, no essential oils – Non-reactive – Globally unique technology.

INSTRUCTIONS: Clean the surfaces to be treated. Then spray CERACOAT Anti Odor pure (no dilution) with a pump spray as a fine spray directly on the surfaces that emit unpleasant odors. In textile fibers (example: carpets), it may be advantageous to gently scrub the area with a soft brush, so that the product can penetrate! Traditional products or other sprays are “Perfume” which are sprayed into the air to distribute a corresponding fragrance. CERACOAT Organic Anti Odor is not sprayed in the air but directly on the spot that emits the bad odor, for example on carpets. The molecules contained in the product now fight those “bad-smelling” bacteria with the result of an odor-neutralization. But to give you an immediate effect when sprayed, the product also contains a natural fragrance that is degraded relatively quickly, until the coating works by neutralizing the bacteria.

The post Shop first appeared on Ceracoat Ceramic.

CERACOAT Ceramic Engine Care for Trucks 450 ml

Carmen — Wed, 04 Dec 2019 21:20:19 +0000

Per tutti i tipi di motori (di camion) (carburante, benzina, diesel, turbo, motori da corsa per camion (barche)).

Ceracoat Ceramic Protettore Motore Ceramico è un rivestimento ceramico che protegge il motore e gli ingranaggi dall'usura.

**Applicabile anche per il cambio (manuale, non automatico), differenziali, catene, sospensioni, sistemi idraulici.**

Le particelle di ceramica aderiscono alle parti metalliche del motore, formando una pellicola protettiva / barriera protettiva che riduce l'attrito e l'usura del motore e degli ingranaggi.

Il risultato è un'importante riduzione dei consumi, della temperatura, del consumo di olio, della rumorosità, delle emissioni di scarico e un aumento dell'efficienza del motore, della sua potenza e della sua durata.

Ceracoat Ceramic Protettore Motore Ceramico protegge il motore anche durante l'avviamento a freddo e in caso di mancata lubrificazione.

CERACOAT VI FA RISPARMIARE TEMPO E DENARO!

APPLICAZIONE::

Non è necessario cambiare l'olio o il filtro prima dell'applicazione.

Ceracoat Ceramic Protettore Motore Ceramico va semplicemente aggiunto all'olio di motore CALDO. Dopo guidare il veicolo per 10-15 minuti.

Ceracoat non intasa il filtro.

1 dose (450 ml di concentrato) per un periodo di 4-6 mesi o dopo 50'000 km (30'000 miglia) 1 dose per un massimo di 25 litri di olio (o meno).

The post Shop first appeared on Ceracoat Ceramic.