The post Shop first appeared on Ceracoat Ceramic.
]]>
LEATHER CARE CAR INSIDE
Ceracoat Ceramic Leather Care Car Inside coats and protects all your leather/plastic surfaces (but also painted wood) such as seats, car cockpits, steering wheels from liquids (water, oil, milk) and dirt in general and gives the leather or plastic a new deep shine. The surface has water-repellent properties (formation of drops), dust and dirt do no longer penetrate the pores. Ceracoat Ceramic Leather Care Car Inside is very long-lasting. After treatment with Ceracoat Ceramic Leather Care Car Inside, you no longer need conventional cleaners.
CERACOAT POUPE-LHE TEMPO E DINHEIRO!
APPLICATION:
Leather/plastic surfaces must be clean and dry – shake well before use. You can coat leather/plastic, natural or already polished. Just give some drops of Ceracoat Ceramic Leather Care Car Inside onto a cloth and rub the surface and then let it act for a few hours.
CLEANING AFTER TREATMENT WITH CERACOAT
Dust, dirt and liquids can simply be shaken away or absorbed with an absorbent paper. Creamy and sticky liquids, such as grease or oil, can only be cleaned with water, rinsed away (or wiped away directly with a wet cloth). Then just absorb the water with an absorbent paper.
The post Shop first appeared on Ceracoat Ceramic.
]]>CERACOAT®DES - BIOFLAVONOID TECHNOLOGY
POWERFUL PLANT-BASED ANTIMICROBIAL, ANTIVIRAL AND ANTIFUNGAL PROTECTION - Kills up to 99,99% of bacteria and viruses and lasts for up to 6 months. Highly effective surface
disinfectant / coating.
The post Shop first appeared on Ceracoat Ceramic.
]]>COMPOSIÇÕES NATURAIS E ORGÂNICAS
FORMULAÇÕES SEGURAS E AMIGÁVEIS AO AMBIENTE
SOLUÇÕES NÃO TÓXICAS E NÃO ALERGÉNICAS
SUSTENTÁVEL, RECICLADO E RECICLÁVEL
INGREDIENTES SEGUROS PARA ALIMENTOS
O selante para superfícies duras cria uma barreira microbiana que ajuda a prevenir infeções cruzadas, criando um ambiente hostil para agentes patogénicos e biofilmes.
Ao contrário dos desinfetantes convencionais, a proteção antibacteriana e antimicrobiana entra em ação após um curto período de tempo e protege de forma sustentável contra vírus, bactérias e micróbios por até 6 meses. Não é necessário usar desinfetantes por 6 meses!
Os vírus são a causa mais comum de doenças infecciosas transmitidas em ambientes fechados, como hospitais, escolas, locais de trabalho e residências, e têm um impacto significativo na saúde humana. A COVID-19 revelou, de forma assustadora, os mecanismos de contágio e infeção cruzada em todo o mundo. Os vírus aderem às gotículas de humidade que são expelidas pela pessoa infetada e chegam a pontos de contacto de alto risco através do ar. CERACOAT®DES SPRAY DE SELAGEM DE SUPERFÍCIES RÍGIDAS Ideal para superfícies de contacto lisas e não absorventes com alto risco, tais como: portas, maçanetas, botões de elevador, corrimãos de escadas, assentos sanitários, interruptores, ecrãs táteis, telemóveis, carrinhos de compras, cartões de crédito, superfícies de secretárias, terminais de pagamento, áreas de compras, etc. Descrição Informações adicionais CERACOAT®DES: Os bioflavonoides – um grande grupo de componentes vegetais naturais não tóxicos – são amplamente conhecidos na área da saúde pelos seus poderosos efeitos antioxidantes, anti-inflamatórios, antialérgicos, antibacterianos, antimicóticos, antivirais, neuroprotetores e curativos, e ajudam até mesmo a combater bactérias resistentes a antibióticos. O nosso complexo patenteado de bioflavonoides oferece proteção natural, segura e eficaz contra infecções respiratórias comuns, como SARS-COVID, gripe e rinovírus. A fórmula foi testada por laboratórios independentes e destrói vírus encapsulados e não encapsulados em 1 a 5 minutos após o contacto, dependendo da concentração e do tipo de vírus, e desativa a sua capacidade de se multiplicar e infectar outras células saudáveis, utilizando ingredientes vegetais orgânicos, adequados para consumo alimentar, sem OGM e geralmente não alergénicos. Cómo se utiliza: Aplique CERACOAT®DES desinfetante de longa duração na superfície e espalhe uniformemente com um pano. Deixe secar. Não enxague. Pode ser usado em todas as superfícies. Efeito antimicrobiano sustentável por até 6 meses (testado de acordo com as normas EN 13624:2013 – EN 1650:2019 – EN 1276:2019 – EN 13727:2012 + A2:2015) (vírus envelopados, incluindo coronavírus, VIH, VHB, VHC, herpes, gripe, vírus Ébola ...)The post Shop first appeared on Ceracoat Ceramic.
]]>The post Shop first appeared on Ceracoat Ceramic.
]]>CERACOAT ProtectAll (for all hard surfaces)
ProtectAll is also antibacterial and has anti-scratch & anti-finger-print properties.
CERACOAT ProtectAll é um renovador e protetor de superfícies não absorventes/duras muito duradouro.
CERACOAT ProtectAll renovará, deixará brilhantes e reluzentes todas as suas superfícies duras, e a fina película nano cerâmica irá protegê-las. As superfícies tornam-se repelentes a líquidos e sujidade, e fáceis de limpar. CERACOAT ProtectAll é neutro em termos alimentares, totalmente seguro e antibacteriano.
Pasta de dentes, sabão, gordura, calcário, chuva e poeira não aderem mais às superfícies e não deixam mais resíduos permanentes.
Após o tratamento com CERACOAT ProtectAll já não precisa de produtos de limpeza. Basta limpar com uma toalha ou enxaguar com água.
CERACOATProtectAll saves you time and money, by preserving the nature. CERACOATProtectAll is completely safe and foodstuff neutral!
APLICAÇÃO: A superfície deve estar seca. Coloque algumas gotas numa toalha (ou papel absorvente ou microfibra) e aplique com movimentos circulares. Verá uma película mate. Aguarde 2-3 minutos e, em seguida, lustre até que a película mate desapareça, ficando apenas uma superfície perfeitamente brilhante, lisa e limpa. Aguarde 2 horas antes de expor a superfície CERACOATED à água. 10-20 ml por m² / 10 pés quadrados é suficiente.
Isso proporcionará o melhor desempenho para uma proteção muito duradoura.
CLEANING AFTER TREATMENT WITH CERACOAT ProtectAll
O pó, os líquidos e/ou a sujidade podem ser facilmente removidos com um pano ou papel absorvente, ou simplesmente enxaguados com água e depois secos. Não é necessário mais nenhum produto de limpeza.
The post Shop first appeared on Ceracoat Ceramic.
]]>The post Shop first appeared on Ceracoat Ceramic.
]]>Ceracoat Shoe Care waterproofs and protects your shoes (+ other absorbent surfaces) against rain/water (also oil, coffee, sauces, etc. for all absorbent surfaces) and dirt. Ceracoat Shoe protectant is foodstuff neutral. Ceracoat thin nano ceramic film will waterproof and protect your shoes (+ textile surfaces), whilst remaining totally invisible! Water is repelled (building drops, no penetration into the surface), dirt will not penetrate or adhere on the shoes anymore.
After treatment with Ceracoat you no longer need any cleaners or greases and will clean less. Ceracoat is breathable and permanent (UV-stable, very resistant to abrasion), and very long lasting.
CERACOAT POUPE-LHE TEMPO E DINHEIRO!
APPLICATION: Surface must be clean and dry. Just spray Ceracoat shoe care on your shoes and let it dry. (Normally 24 h should be enough).
For textile: Start by testing them:
Put a drop of water on the surface. The drop has to be absorbed by the surface to be treated with Ceracoat. If the water drop is not absorbed immediately, this means that the surface is already treated and cannot be treated with Ceracoat.
The post Shop first appeared on Ceracoat Ceramic.
]]>The post Shop first appeared on Ceracoat Ceramic.
]]>For all surfaces of glass, plastic, chrome, copper, silver, ceramic, metal: shower cabin, toilet, lavabo, bath, tiles, bathroom in general, windows, mirrors, glass furniture. Ceracoat Anti-Lime is also antibacterial and has anti-scratch & anti-finger-print properties.
Ceracoat Anti-Lime is a very long-lasting protectant for non absorbent surfaces. (2 pre-cleaning wipes & 2 anti-lime coating wipes)
Ceracoat thin nano Ceramic film will protect all your glass, plastic, chrome, copper, silver, ceramic, metal surfaces. Surfaces become liquid & dirt repellent, easy to clean and LIME will not adhere any more! Ceracoat Anti-Lime is foodstuff neutral.
Toothpaste, soap, grease, will not adhere to the surfaces anymore.
No more lime on the surface. Easy to clean.
After treatment with Ceracoat you no longer need any cleaners. Just clean with a towel or rinse with water. Ceracoat saves you time and money!
APLICAÇÃO::
- Surface must be dry
- Use a lime cleaner to make sure surface is lime-free. Then clean with the pre-cleaning wipe and polish until surface is dry. Then use Ceracoat Anti-Lime NANO coating wipe with circular movements and polish it dry. Please wait 4 h before exposing the ceracoated surface to water. 1 wipe is enough for 4m2.
CLEANING AFTER TREATMENT WITH Ceracoat
- Liquids and dirt are very easily removed just using a towel, an absorbent paper or just rinse it away with water. Surface will remain lime-free and no cleaners are needed any more.
The post Shop first appeared on Ceracoat Ceramic.
]]>The post Shop first appeared on Ceracoat Ceramic.
]]>Cleans the entire inside of the engine.
Dirt in the engine is transformed and eliminated through the exhaust.
Cleans the valves, carburator or ignition, pistons, cylinder head, cylinder walls, pistons rings, the entire exhaust system.
Binds existing water drops in the fuel tank and eliminates them. It stops adherence of new engine dirt, re-establishes the actual compression of the engine, and reduces the exhaust emissions massively.
Main Advantages
- Cleans and lubricates the entire fuel system
- Reduces blow-by and engine oil dirtying
- Less dirtying of the EGR system.
- Treats damp in the fuel (biodiesel)
- Reduces the soot emissions and the dirtying of the intake manifold
- Minimizes the sooting of sensor mechanisms of variable turbos
- Optimizes the fuel consumption and ensures cleaner exhaust gasses
- Improves the combustion and the engine performance
- Reduces the congealing temperature of the fuel (flocculation in winter)
CERACOAT SAVES YOU TIME AND MONEY!
APPLICATION:
(For all petrol and diesel engines: standard, turbo, race engines) Simply add Ceracoat Engine Cleaner in one time to the fuel (petrol or diesel) tank and then drive the vehicle for about 10 – 15 minutes. Best is to add one (1) dose every 20.000 km (12.000 mls). Please add one (1) dose when there are just about 60 liters (15 gallons) of fuel / gasoline left.
The post Shop first appeared on Ceracoat Ceramic.
]]>The post Shop first appeared on Ceracoat Ceramic.
]]>Stone, sand stone, concrete, roofing tiles, tiles, natural stones, granite, marble, wood, teak, fibre concrete – mosaic – clay, terracotta – bricks – glass, ceramics – mineral surfaces – grit stone.
CERACOAT Wonder Cleaner is highly effective. It’s a universal concentrate allowing thorough cleaning of the surfaces with the innovative micro-splitting procedure, which breaks down the molecule of the dirt into separate particles, removing them efficiently without harmful surfactants, tensides, solvents, enzymes and bleaches.
CERACOAT Wonder Cleaner removes also persistent remains of dirt like oil, fat, smoke, nicotine, soot, as well as remains of tensides and dirt of marble, terrazzo, granite, tiles, fine stoneware.
Mixing instruction:
Depending on the degree of the pollution the Wonder Cleaner can be diluted with distilled water in the ratio of up to 1 to 10.
Application:
Spray on the undercoat only, let it affect shortly, and rinse with a lot of water.
IMPORTANT!
Please use protective gloves.
(Before starting the cleaning works, all surfaces should be checked for their cleaning suitability).
The post Shop first appeared on Ceracoat Ceramic.
]]>The post Shop first appeared on Ceracoat Ceramic.
]]>and to prevent corrosion. Specifically to rifles, CERACOAT gun coating has the advantage that it is abrasion-resistant and cannot flow down as a result of gravity. CERACOAT gun coating is dry on the surface and can not be wiped off by hand. If the gun barrel covers by hand, the perspiration does not penetrate the coating and thus prevents corrosion.
CERACOAT Gun Coating on steel is a silky-matte finish and is colorless and odorless. Even older weapons have again a beautiful, intense look. CERACOAT gun coating can be applied on nearly all surfaces such as steel, wood (painted), rubber, plastic and cast iron. The direct application to gold and silver ornaments is also always possible. Active from -50°C to +750°C
Application: CERACOAT Gun Coating will be applied on the cleaned weapon. Metal parts should be degreased before application, so that the ceramic particles can adhere directly on the steel. Spray CERACOAT gun coating thin on the surface and distribute the product with a microfiber-towel so that a fine wet film comes into being. After that, CERACOAT gun coating dries from itself within 30min. After 2 hours it will be fully hardened. In case of using CERACOAT gun coating into the barrel, the barrel must be absolutely clean. Apply the CERACOAT gun coating with a cotton-plug and move the cleaning rod several times forward and backwards. For care-treatment of guns use the pump spray. For smaller parts and to reduce the trigger weight, you can apply some drops.
The post Shop first appeared on Ceracoat Ceramic.
]]>The post Shop first appeared on Ceracoat Ceramic.
]]>APLICAÇÃO:: Ideal for removing odors coming from garbage, cigarettes, pets, waste bags, sports bags, laundry baskets, etc.
CERACOAT Anti Odor for textiles is a chemical-free, pH neutral product for the removal of bad odors from organic impurities. This product is used when organic contaminants such as blood, urine, feces, sweat and body odor causes bad smells on textiles. The product also removes odors from dogs of carpets. CERACOAT Anti Odor is not harmful to humans and animals. It has a light fragrance, to ensure the fastest possible effect. This fragrance is reduced in a natural way again. Meanwhile, the microorganisms are dissolving those bacteria that cause the bad smell.
FEATURES: High performance, highly concentrated – Researched without animal tests – pH-neutral, no toxic fumes – Safe for skin – Non-corrosive for surfaces – Safe for users, equipment and the environment – Gets no hypersensitivity syndrome – No ingredients of animal nutrient media – Compliance with the EC Directive 648/2004 on detergents – Fully biodegradable – Hypoallergenic, no essential oils – Non-reactive – Globally unique technology.
INSTRUCTIONS: Clean the surfaces to be treated. Then spray CERACOAT Anti Odor pure (no dilution) with a pump spray as a fine spray directly on the surfaces that emit unpleasant odors. In textile fibers (example: carpets), it may be advantageous to gently scrub the area with a soft brush, so that the product can penetrate! Traditional products or other sprays are “Perfume” which are sprayed into the air to distribute a corresponding fragrance. CERACOAT Organic Anti Odor is not sprayed in the air but directly on the spot that emits the bad odor, for example on carpets. The molecules contained in the product now fight those “bad-smelling” bacteria with the result of an odor-neutralization. But to give you an immediate effect when sprayed, the product also contains a natural fragrance that is degraded relatively quickly, until the coating works by neutralizing the bacteria.
The post Shop first appeared on Ceracoat Ceramic.
]]>The post Shop first appeared on Ceracoat Ceramic.
]]>Ceracoat Ceramic Engine Care é um revestimento cerâmico que protege o motor e a transmissão contra o desgaste.
**Aplicável também para caixa de velocidades (manual, não automática), diferenciais, correntes, suspensões, sistemas hidráulicos**
As partículas cerâmicas aderem às peças metálicas do motor (anéis de pistão e paredes do cilindro), formando uma película protetora/barreira de proteção que reduz o atrito e o desgaste do motor (e da transmissão).
O resultado é uma redução significativa do consumo, da temperatura, do consumo de óleo, do ruído, das emissões de escape e um aumento da eficiência do motor, da sua potência e da sua vida útil.
O Ceracoat Ceramic Protetor de motor cerâmico também protege o motor durante a partida a frio e falhas de lubrificação.
CERACOAT POUPE-LHE TEMPO E DINHEIRO!
APLICAÇÃO::
Não é necessário trocar o óleo ou o filtro antes da aplicação.
O Ceracoat Ceramic Protetor de motor cerâmico deve ser simplesmente adicionado ao óleo do motor QUENTE. Em seguida, conduza o veículo durante 10 a 15 minutos.
O Ceracoat não bloqueia o filtro.
1 dose (450 ml de concentrado) por período de 4-6 meses ou 50.000 km (30.000 milhas) 1 dose para até 25 litros de óleo do motor (ou menos).
The post Shop first appeared on Ceracoat Ceramic.
]]>